
NetAlly · Network Test Tool
NetAlly LinkRunner 10G LR10G-100 Network Tester / Copper & Fiber Optic, Layer 1-7 Troubleshooting, Professiona…
Model: LinkRunner 10G|Condition: Original New|Warranty: 1 year
ImportGM supplies the NetAlly LinkRunner 10G, a network test tool built for campus, branch and data centre networks, to distributors, system integrators and enterprise IT procurement teams across Europe, North America and the Middle East. Leverage advanced AndroidTM-based troubleshooting applications and dedicated test hardware to upgrade technologies for installation, testing, validation, and troubleshooting of Multi-Gigabit (NBASE-T) and 10G networks. Core parameters include dimensions 4.05 in x 7.67 in x 2.16 in (10.3 cm x 19.5 cm x 5.5 cm), weight 1.68 lbs (0.77 kg). Original New units carry the 1 year ImportGM warranty; quotation, proforma invoice and export packing list are issued the same day.
- ✔Verify Power over Ethernet (PoE) devices up to 90W (802.3bt standard) through TruePower-loaded PoE testing
- ✔A Flexible Platform for Diverse Testing Needs
- ✔Simplify Tasks and Empower Technicians with Next-Gen AutoTest Technology for Complex Network Validation
- ✔PoE validation for PSE switch ports up to 90W and TruePower? load testing
- ✔Comparison of link speed/duplex nominal vs. actual values, and SNR measurement for Multi-Gigabit links
- ✔VLAN-tagged traffic detection and monitoring
Bulk pricing available · Export packing & documentation · DHL / FedEx / air / sea freight
Technical Specifications
| Specification Category | Details |
|---|---|
| Dimensions | 4.05 in x 7.67 in x 2.16 in (10.3 cm x 19.5 cm x 5.5 cm) |
| Weight | 1.68 lbs (0.77 kg) |
| Battery | Rechargeable lithium-ion battery pack (7.2 V, 6.4 A, 46 Wh) |
| Battery Life | Typical operating life: 3–4 hours; Typical charging time: 3 hours |
| Display | 5.0-inch color LCD with capacitive touchscreen (720 x 1280 pixels) |
| Host Interfaces | - RJ-45 and SFP analysis ports - RJ-45 cable testing and management port - USB Type-A port and USB Type-C On-the-Go port |
| SD Card Port | Supports Micro SD card storage – up to 64GB |
| Memory | Approximately 8 GB of available space for storing test results and user applications; 1 GB packet capture buffer |
| Charging | - USB Type-C 45-W adapter: 100–240 Vac, 50–60 Hz; DC output: 15 V (3 A) - RJ-45: 802.3at PoE (25W) or higher |
| Media Access | - Copper: 10M / 100M / 1G / 2.5G / 5G / 10G - Fiber SFP adapter: 1G / 10GBASE-X |
| Supported IEEE Standards | - Wired: 802.3 / ab / ae / an / bz / i / u / z - PoE: 802.3af / at / bt, Classes 0–8, and UPOE |
| Cable Testing | Pair length, opens, shorts, split pairs, crosses, straight-through, and WireView ID |
Product Overview
Leverage advanced AndroidTM-based troubleshooting applications and dedicated test hardware to upgrade technologies for installation, testing, validation, and troubleshooting of Multi-Gigabit (NBASE-T) and 10G networks
Physical layer testing includes cable (TDR) testing, audio cable tracing, cable locating, and cable Signal-to-Noise Ratio (SNR) measurements for Gigabit links
Compatible with standard-compliant SFPs, enabling testing and validation of any wired media (copper and fiber) across various usage models
Pair with EtherScope nXG for wire-speed testing to validate network throughput, performance, and Quality of Service (QoS) between sites, as well as service provider Service Level Agreements (SLAs)
Primary Test RJ-45 Port: Supports Multi-Gigabit networks from 10/100/1000Mbps to 2.5/5/10G. It verifies link speed, SNR, and nominal/negotiated duplex speeds, requests and validates PoE power under PSE loads up to 90W, and connects to fiber networks via single/multi-mode SFP+ for testing 1/10Gbps fiber-based Ethernet.
Secondary RJ-45 Management Port: Connects to 10/100/1000Mbps Ethernet for remote control, and enables network scanning/testing when needed. This port is also used for cable testing.
Related Network Test Tools

NetAlly
1TG2-1500-LRAT2
NetAlly 1TG2-1500-LRAT2/1TG2-3000-LRAT2 Network Tester

NetAlly
AM/A4018
NetAlly AirMagnet Survey PRO Wireless Survey Instrument, WLAN Analysis Tool (AM/A4018)

NetAlly
AirCheck G2
NetAlly AirCheck G2 Wireless Network Tester AIRCHECKG2-TA-KT (Full Set of Accessories) - 2-in-1 for Multiple Wi-Fi Standards, Wired PoE+ and Wireless Interference Detection

NetAlly
AirCheck G3 Pro
NetAlly AirCheck G3 Pro 3rd-Generation Wireless Network Test Analyzer with Full Frequency Band Coverage (2.4/5/6GHz) And Link-Live Cloud Collaboration Functionality

NetAlly
EXG-300
Netally EXG-300 Professional Intelligent Network Testing Tool (Dual Support for Wi-Fi 6/6E + 10GbE, Dedicated for Troubleshooting / Deployment & Maintenance)

NetAlly
EtherScope nXG
NetAlly EXG-200 EtherScope nXG Cable Network Tester
About Network Test Tools from ImportGM
Cable certification, network testing and Wi-Fi survey instruments from Fluke Networks, NetAlly and NetScout.
Browse all Network Test Tools →